Assembling the Dredge

To assembling the dredge needs to be done in a big open space such as your back yard etc. and as soon as the dredge has been put together it will be necessary to look over the completed project and the steps that went into the set up according to your own requirements for transporting it. In other words, you might be able to separate the dredge into some parts as sub assemblies that will only require of a certain amount of fasteners instead of having to set it all up there in the field, which will only be a waste of time. Evidently this is something each individual will need to think about and see what the most convenient option is. The ideal would be to have to set up as few parts as possible once on the field. The next step will be in testing the dredge so you are able to find out if everything is working as it should. The best thing is for this starting off launch and test to be done in still water that is deep enough to clear the intake hose by twelve inches or more if possible. If you have a swimming pool or access to one you can use this for testing. If there is none available the second best option is to go to a pond or slow moving portion of a stream that is close by your area.